« previous next »
Pages: [1]   Go Down

Author Topic: JPSS on ash question  (Read 339 times)

0 Members and 2 Guests are viewing this topic.

stormy

  • Full Member
  • Posts: 124
    • View Profile
JPSS on ash question
« on: February 03, 2012, 02:21:44 PM »
Do you guys think the ash shirt color will show through the print on this if I use JPSS paper? I'm thinking the grey will show through the yellow/orange parts so I'm debating whether I should have them DTG printed or not.

Logged

Neuromax

  • Jr. Member
  • Posts: 78
    • View Profile
Re: JPSS on ash question
« Reply #1 on: February 03, 2012, 02:42:38 PM »
Yes it will change the coloring some, with jpss it uses the white from the shirt for the white needed in the colors so it will always change the shades slightly. Plus every where you have white in that design will show as ash.

I need a good source for DTG, do you have one?
Logged

stormy

  • Full Member
  • Posts: 124
    • View Profile
Re: JPSS on ash question
« Reply #2 on: February 03, 2012, 07:25:08 PM »
Oh, good call. Forgot there was white in the design. Damn, now they have to be DTG printed with white too. Ha. Yeah there's a couple DTG guys on the forum.
Logged

Neuromax

  • Jr. Member
  • Posts: 78
    • View Profile
Re: JPSS on ash question
« Reply #3 on: February 04, 2012, 09:57:41 AM »
Quote from: stormy on February 03, 2012, 07:25:08 PM
Oh, good call. Forgot there was white in the design. Damn, now they have to be DTG printed with white too. Ha. Yeah there's a couple DTG guys on the forum.

Can you point me to a good one? I used one forum member and was LESS than happy with the results and so was my customer. I took a huge loss on that deal.
Logged

mr300s

  • Hero Member
  • Posts: 1391
    • View Profile
Re: JPSS on ash question
« Reply #4 on: April 13, 2012, 09:03:51 AM »
I am curious what was the problem with the shirt and did you let the forum member kno you and your customer weren't happy?
Logged
Graphtec CE5000-60 with Clean Cut Blades. Hix 9" x 12" Heat Press Mighty Might Hat Press
Phoenix Phire 16x20 Auto-Open Digital Heat Press , Hix Mug Press, George Knight Mug Press
Three  Epson 1100's with Cobra CISS systems One High Temp Ink for Sublimation
Flexi starter, Corel X3 ,sign blazer & inks

Dakotagrafx

  • Global Moderator
  • Hero Member
  • Posts: 4020
    • View Profile
Re: JPSS on ash question
« Reply #5 on: April 13, 2012, 08:32:32 PM »
+1 what Bill said.  Most problems can be traced back to heat press problems (time temp, accuracy), or garment problems (store bought that have been sprayed, wrong color, incompatable material, bad color choice)  seldom is it the JPSS. 
  always try to work it out with the person before making it public.
Logged
Graphtec CE5000-60, Corel x6, LXI VE master pro 10,  Hotronix Heat Press, Roland sp-300v
''Many of life's failures are people who did not realize how close they were to success when they gave up.''
Thomas Edison
http://www.cleancutblade.com/
Honesty, Integrity, Teamwork

Neuromax

  • Jr. Member
  • Posts: 78
    • View Profile
Re: JPSS on ash question
« Reply #6 on: April 14, 2012, 08:09:53 AM »
The problems I had were with the DTG, the colors weren't even, the red wasn't a solid, you could see the yellow shirt through the red, overall quality was just much less than I was expecting. Overall they looked like they had been washed 20 times just to give you an idea. As to if I notified the member on here, yes I did and expressed my problems and concerns. I was answered with no replies. My solution was easy, I gave them to the customer for less than I had in them and I have not sent any more business to the member here. There were only 14 (I think) shirts and all were the same.
Logged

Dakotagrafx

  • Global Moderator
  • Hero Member
  • Posts: 4020
    • View Profile
Re: JPSS on ash question
« Reply #7 on: April 14, 2012, 08:19:27 AM »
now that is a whole diffident animal than jpss . . . again I misunderstood - time for 3g opaque then,
Logged
Graphtec CE5000-60, Corel x6, LXI VE master pro 10,  Hotronix Heat Press, Roland sp-300v
''Many of life's failures are people who did not realize how close they were to success when they gave up.''
Thomas Edison
http://www.cleancutblade.com/
Honesty, Integrity, Teamwork
Pages: [1]   Go Up
« previous next »