Author Topic: loosing letters when going from corel draw5 to sign cut (Read 1149 times)

jtinker00 · « **on:** December 25, 2011, 09:32:09 PM »

i have a large wall project. i save my file from corel draw as i always do as an svg because esp will not open. it just says sign cut has an error and shuts down when i try to open an esp with signcut, but anyways the letter I will not show up or even cut from signcut. i tried changing fonts and resaving it. and it still will not do it. any ideas? thanks

DazzaBling · « **Reply #1 on:** December 26, 2011, 03:11:19 AM »

Hav you tried converting the text to curves?

-eps version again
-svg 2nd

When you go through the prompts when save as/ exporting .eps make sure text is "curves" not "text"

See if that helps

Openco · « **Reply #2 on:** December 26, 2011, 05:57:03 AM »

Another thing to try - open SC Pro first, then try the export from your design. Also, just try opening the file from SC Pro. Both of these options work for me. I know you shouldn't have to, but that's what works for me. My SC Pro "prefers" eps, but svg work fine too. Weird, I know...

jtinker00 · « **Reply #3 on:** December 26, 2011, 07:51:01 PM »

so i figured that out. now when i open the project as an eps it will not show different colors and when it gets almost al of the way done it freezes up on my cutter.

DazzaBling · « **Reply #4 on:** December 27, 2011, 02:26:25 PM »

Have you tried making it smaller and see if it cuts out correctly to rule out the size.

News:

Author Topic: loosing letters when going from corel draw5 to sign cut (Read 1149 times)

jtinker00

loosing letters when going from corel draw5 to sign cut

DazzaBling

Re: Re: loosing letters when going from corel draw5 to sign cut

Openco

Re: loosing letters when going from corel draw5 to sign cut

jtinker00

Re: loosing letters when going from corel draw5 to sign cut

DazzaBling

Re: loosing letters when going from corel draw5 to sign cut