« previous next »
Pages: 1 [2]   Go Down

Author Topic: after first blast new questions  (Read 740 times)

0 Members and 3 Guests are viewing this topic.

Freebird1963

  • Jr. Member
  • Posts: 72
    • View Profile
Re: after first blast new questions
« Reply #15 on: January 17, 2012, 05:11:35 PM »
holy smokes I got the Vac connected to the side of the cabinet box and when I turn the vac on holey crap the gloves go straight out like they are on Viagra and with my hands in them can't move them. They are stiff like a corpse. Guessing the vac is too powerful for the box size ?
I hate to spend more money and have to get a smaller vac.
Logged

Mr Peabody

  • Hero Member
  • Posts: 1421
    • View Profile
Re: after first blast new questions
« Reply #16 on: January 17, 2012, 07:47:04 PM »
 :D :D :D :D

Yep, got good suction. That will change as you blast and the filter gets clogged. The gloves will loosen up after you use em some. You'll need to clean the filter out so you don't mess burn up the vac.

You see....  :D
Logged
Never argue with an idiot. They'll bring you down to their level and beat you with experience every time.

kyjeeper

  • Administrator
  • Hero Member
  • Posts: 923
    • View Profile
Re: after first blast new questions
« Reply #17 on: January 17, 2012, 09:28:06 PM »
That much vacuum tells me theres no air coming into the cabinet to replace whats being taken out.  the HF cabinet has a filtered vent opposite side of the cabinet from the vacuum port that allows for good airflow. May be something to consider.
Logged

Freebird1963

  • Jr. Member
  • Posts: 72
    • View Profile
Re: after first blast new questions
« Reply #18 on: January 18, 2012, 10:11:28 AM »
There a little hole on the back side 90 degress offset from the filter port. Couple inches wide and tall
Tell you this that little shit hurts when you blast it into your bare hand tho. Didn't see anything coming out at first so like a idiot stuck my bare hand in the air flow. OUCHHHHHHHHHHH.
Logged

Freebird1963

  • Jr. Member
  • Posts: 72
    • View Profile
Re: after first blast new questions
« Reply #19 on: January 18, 2012, 10:13:52 AM »
If you look at the post here at the back of the cabinet you can make out the square outline of what I'd call the air inlet.
Same cabinet as mine or looks like it. Mine just says JobSmart.
http://www.vinylforum.org/smf/sandblasting/black-bull-blast-cabinet/
Logged
Pages: 1 [2]   Go Up
« previous next »